Double-sided HighTemp powder-coated spring steel sheet for the Prusa CORE One/+ and CORE One+ (Gen 2)

OVERVIEW:
The HighTemp sheet is built for engineering-grade, high-temperature filaments rather than everyday materials. Its powder-coated textured surface grips materials such as PPS-CF/GF, PPA-CF, PEKK-CF, PES and PSU, and it holds up through repeated heating cycles well above 100 °C. With a CORE One series printer fitted with the HT Hotend, it puts industrial materials with strong heat, chemical and wear resistance within reach of a desktop machine.

Compatible with: Prusa CORE One/+, Prusa CORE One+ (Gen 2)

DETAILS:

• Double-sided powder-coated spring steel sheet, 254 × 241 mm
• Designed for high-temperature materials; longer lifespan at elevated temperatures
• Transfers a textured finish to the bottom of prints
• Some materials may need a separation layer such as Magigoo HT
• Not suitable for low-temperature materials such as PLA and PETG
• Requires a CORE One series printer with the HT Hotend for high-temperature materials

WARNING:
Do not clean this sheet with isopropyl alcohol, acetone or any other alcohol-based solvent, as it will damage the surface. Wash it with dish soap and water before each print, and let prints cool inside the printer before removing them.

What's included: 1 × HighTemp Print Sheet

Note:
Print sheets are consumable parts. The coatings wear over time, so they are not covered by warranty unless faulty on arrival due to a defect in materials or workmanship. Cosmetic damage (scratches, dents, probing marks, purge line marks or damage from too little Magigoo HT) is not covered.