ColorFabb LW-ASA Black 650g 1.75mm

This is Colorfabb's most basic LW-ASA. When foamed the surface finish is matte.

This LW-ASA material is capable of increasing its volume nearly 2,5 times. Meaning parts can be printed with reduced flowrate down to 40%. The filament density is close to 1,07 g/cm3 but when foamed at its maximum capacity and printed at 40% flowrate users will achieve part density close to 0,43 g/cm3.

Like regular ASA the LW-ASA features inherent UV stability and high temperature resistance of 96C. Rest assured this material will be more capable of handling increased temperatures compared to our LW-PLA.

LW-ASA is more susceptible to warping compared to LW-PLA type filament. Especially models with a large footprint can shrink and warp during printing, but compared to ABS in most cases less severe.

Please note that color variations may occur. Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

Refer to www.colorfabb.com for printing advice.