{"title":"Sheets","description":"\u003cp\u003eSheets\u003c\/p\u003e","products":[{"product_id":"double-sided-powder-coated-pa-nylon-spring-steel-sheet","title":"Prusa - CORE One PA Nylon Powder-coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003ePA Nylon Powder-coated Print Sheet for Original Prusa CORE one\/+, MK4\/S, MK3\/S\/+ and MK2.5\/S heatbeds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003cbr\u003eThis print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fibre Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT!\u003c\/strong\u003e\u003cbr\u003eThe surface of this sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003cbr\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat for polyamide-based materials Suitable only for polyamide-based materials and PETG.\u003c\/li\u003e\n\u003cli\u003eOther materials tend to detach mid-print\u003c\/li\u003e\n\u003cli\u003eNo need for a glue stick\u003c\/li\u003e\n\u003cli\u003eCan be damaged with IPA and acetone\u003c\/li\u003e\n\u003cli\u003eCan be cleaned just with water\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531792867607,"sku":"PRU-ACC-MK3-0001","price":98.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/DFCA.jpg?v=1751583276"},{"product_id":"double-sided-powder-coated-pei-satin-spring-steel-sheet","title":"Prusa - CORE One Satin Powder-coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003eSatin Powder-coated Print Sheet for Original Prusa CORE one\/+, MK4\/S, MK3\/S\/+ and MK2.5\/S heatbeds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003cbr\u003eThe Satin sheet further expands Prusa's line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, Flex Fill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cbr\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's knowledge base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for both PLA and PETG\u003c\/li\u003e\n\u003cli\u003eAcetone causes the surface to quickly deteriorate\u003c\/li\u003e\n\u003cli\u003eLightly textured surface finish\u003c\/li\u003e\n\u003cli\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/li\u003e\n\u003cli\u003eNo need for glue stick for PETG\u003c\/li\u003e\n\u003cli\u003eLive Z value needs to be readjusted if you switch sheets\u003c\/li\u003e\n\u003cli\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/li\u003e\n\u003cli\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/li\u003e\n\u003cli\u003eEasy maintenance and good adhesion qualities\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531792900375,"sku":"PRU-ACC-MK3-0002","price":94.27,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/EBFI.jpg?v=1751583278"},{"product_id":"double-sided-textured-pei-powder-coated-spring-steel-sheet","title":"Prusa - CORE One Textured Powder-coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003eTextured Powder-coated Print Sheet for Original Prusa CORE one\/+, MK4\/S, MK3\/S\/+ and MK2.5\/S heatbeds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003cbr\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on Prusa's print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cbr\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScratchproof, hard to damage\u003c\/li\u003e\n\u003cli\u003ePLA prints with a small contact area may need a brim\u003c\/li\u003e\n\u003cli\u003eTransfers texture to prints\u003c\/li\u003e\n\u003cli\u003ePLA prints with a huge footprint may warp\u003c\/li\u003e\n\u003cli\u003eMore forgiving Live Adjust Z setting\u003c\/li\u003e\n\u003cli\u003eNeed to change Live Adjust Z if you also own Smooth PEI sheet\u003c\/li\u003e\n\u003cli\u003eNo need for glue stick for PETG\u003c\/li\u003e\n\u003cli\u003eNever clean with acetone\u003c\/li\u003e\n\u003cli\u003ePrints automatically detach after sheet cools down\u003c\/li\u003e\n\u003cli\u003eFirst layer can be more squished compared to smooth sheets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531792933143,"sku":"PRU-ACC-MK3-0003","price":80.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/CJD.jpg?v=1751583278"},{"product_id":"mini-double-sided-powder-coated-pei-satin-spring-steel-sheet","title":"Prusa - MINI Double-sided Powder-coated PEI Satin Spring Steel Sheet","description":"\u003cp\u003e\u003cstrong\u003eDouble-sided satin powder-coated spring steel sheet for the Original Prusa MINI\/+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003e The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e The Satin sheet further expands Prusa's line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, Flex Fill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cbr\u003e Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for both PLA and PETG\u003c\/li\u003e\n\u003cli\u003eAcetone causes the surface to quickly deteriorate\u003c\/li\u003e\n\u003cli\u003eLightly textured surface finish\u003c\/li\u003e\n\u003cli\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/li\u003e\n\u003cli\u003eNo need for glue stick for PETG\u003c\/li\u003e\n\u003cli\u003eLive Z value needs to be readjusted if you switch sheets\u003c\/li\u003e\n\u003cli\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/li\u003e\n\u003cli\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/li\u003e\n\u003cli\u003eEasy maintenance and good adhesion qualities\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531793064215,"sku":"PRU-ACC-MK3-0005","price":70.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/CCE.jpg?v=1751583414"},{"product_id":"mini-double-sided-textured-pei-powder-coated-spring-steel-sheet","title":"Prusa - MINI Double-sided Textured PEI Powder-coated Spring Steel Sheet","description":"\u003cp\u003e\u003cstrong\u003eThis product is the replacement Double-sided Textured PEI Powder-coated Spring Steel Sheet for the Original Prusa MINI heatbed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-sided Textured PEI Powder-coated Spring Steel Sheet (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e All sheets are checked and verified to be within tight specifications. However, these specifications are both considering the manufacturing method and the sheets function (adhesion and durability used with certain material types), but not the cosmetic aspect of the pattern left on printed parts. We can not guarantee the pattern left on your printed objects will match perfectly from sheet to sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScratchproof, hard to damage\u003c\/li\u003e\n\u003cli\u003ePLA prints with a small contact area may need a brim\u003c\/li\u003e\n\u003cli\u003eTransfers texture to prints\u003c\/li\u003e\n\u003cli\u003ePLA prints with a huge footprint may warp\u003c\/li\u003e\n\u003cli\u003eMore forgiving Live Adjust Z setting\u003c\/li\u003e\n\u003cli\u003eNeed to change Live Adjust Z if you also own Smooth PEI sheet\u003c\/li\u003e\n\u003cli\u003eNo need for glue stick for PETG\u003c\/li\u003e\n\u003cli\u003eNever clean with acetone\u003c\/li\u003e\n\u003cli\u003ePrints automatically detach after sheet cools down\u003c\/li\u003e\n\u003cli\u003eFirst layer can be more squished compared to smooth sheets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531793096983,"sku":"PRU-ACC-MK3-0006","price":60.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/CAF.jpg?v=1751583415"},{"product_id":"mini-spring-steel-sheet-with-smooth-double-sided-pei","title":"Prusa - MINI Spring Steel Sheet With Smooth Double-sided PEI","description":"\u003cp\u003e\u003cstrong\u003eThis product is the replacement Spring Steel Sheet With Smooth Double-sided PEI for the Original Prusa MINI heatbed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpring Steel Sheet With Smooth Double-sided PEI (1pcs)\u003c\/li\u003e\n\u003cli\u003ePEI-Ultem sheet (already mounted and fixed in place on the steel sheet) (2pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e To replace the parts, please follow the manual for your printer model.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003cbr\u003e Tiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for PLA\u003c\/li\u003e\n\u003cli\u003eDo not clean with IPA before PETG\u003c\/li\u003e\n\u003cli\u003eRelease agent might be necessary\u003c\/li\u003e\n\u003cli\u003eGreat adhesion with almost all materials\u003c\/li\u003e\n\u003cli\u003eYou must apply glue stick when printing Flex\u003c\/li\u003e\n\u003cli\u003eSmooth bottom of prints\u003c\/li\u003e\n\u003cli\u003eTiny details will stick great\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531793162519,"sku":"PRU-ACC-MK3-0007","price":50.13,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/CAD.jpg?v=1751583416"},{"product_id":"spring-steel-sheet-with-smooth-double-sided-pei","title":"Prusa - CORE One Smooth PEI Print Sheet","description":"\u003cp\u003e\u003cstrong\u003eSmooth PEI Print Sheet for the Original Prusa CORE one\/+, MK4\/S, MK3\/S\/+ and MK2.5\/S heatbeds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. The Spring Steel Sheet With Smooth Double-sided PEI uses the same PEI sheets as on the MK2\/S. It is the best solution for printing PLA and it has great adhesion with almost all materials. The bottom of your prints will be smooth.\u003c\/p\u003e\n\u003cp\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdate:\u003c\/strong\u003e\u003cbr\u003eThe steel sheet colour may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all colour versions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for PLA\u003c\/li\u003e\n\u003cli\u003eDo not clean with IPA before PETG\u003c\/li\u003e\n\u003cli\u003eRelease agent might be necessary\u003c\/li\u003e\n\u003cli\u003eGreat adhesion with almost all materials\u003c\/li\u003e\n\u003cli\u003eYou must apply glue stick when printing Flex\u003c\/li\u003e\n\u003cli\u003eSmooth bottom of prints\u003c\/li\u003e\n\u003cli\u003eTiny details will stick great\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":45531793850647,"sku":"PRU-ACC-MK3-0021","price":73.12,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/ECEH.jpg?v=1751583627"},{"product_id":"double-sided-powder-coated-pa-nylon-spring-steel-sheet-factory-second","title":"Prusa - Double-sided Powder-coated PA Nylon Spring Steel Sheet (FACTORY SECOND)","description":"\u003cp\u003e\u003cstrong\u003eDouble-sided Powder-coated PA Nylon Spring Steel Sheet for Original Prusa i3 MK3\/S\/+ and MK2.5\/S heatbeds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThis is a FACTORY SECOND product.\u003c\/strong\u003e\u003c\/span\u003e It is rated as factory second due to cosmetic and visual defects only. The cosmetic and visual defects do not impact functionality. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFACTORY SECOND\u003c\/strong\u003e\u003c\/span\u003e products are completely unused.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFactory second\u003c\/strong\u003e product, fully functional with cosmetic and visual imperfections\u003c\/p\u003e\n\u003cp\u003eHairline scratches, visual imperfections of the graphics (missing, blurred), imperfections on the print surface (dents, bumps)\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":46938717978903,"sku":"PRU-ACC-MK3-0029","price":80.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/products\/PA_Nylon_Steel_Sheet_Second.jpg?v=1751583277"},{"product_id":"prusa-xl-smooth-pei-print-sheet","title":"Prusa - XL Double-sided Smooth PEI Steel Print Sheet","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eDouble-sided smooth spring steel sheet for Original Prusa XL.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\" class=\"sc-a598ee94-0 tLDuP\" position=\"center\" mt=\"3\" mb=\"3\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese magnets are able to firmly hold removable spring steel sheets. It is the best solution for printing PLA and it has great adhesion with almost all materials. The bottom of your prints will be smooth.\u003c\/p\u003e\n\u003cp\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eATTRIBUTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePerfect for PLA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreat adhesion with almost all materials\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSmooth bottom of prints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTiny details will stick great\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not clean with IPA before PETG Release agent might be necessary\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eYou must apply glue stick when printing Flex\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\" class=\"sc-a598ee94-0 tLDuP\" position=\"center\" mt=\"3\" mb=\"3\"\u003eNote:\u003c\/h3\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. Prusa do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":48653236044055,"sku":"PRU-SPR-XL-020","price":156.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/Prusa-XLSmoothPEIPrintSheet.jpg?v=1751583612"},{"product_id":"prusa-xl-textured-powder-coated-steel-sheet","title":"Prusa - XL Textured Powder-coated Steel Print Sheet","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eTextured Powder-coated Steel Sheet for Original Prusa XL.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\" class=\"sc-a598ee94-0 tLDuP\" position=\"center\" mt=\"3\" mb=\"3\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on Prusa'a print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eATTRIBUTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eScratchproof, hard to damage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransfers texture to prints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrints automatically detach after sheet cools down\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNo need \u003c\/span\u003e\u003cspan\u003efor glue stick\u003c\/span\u003e\u003cspan\u003e for PETG\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNever clean with acetone\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\" class=\"sc-a598ee94-0 tLDuP\" position=\"center\" mt=\"3\" mb=\"3\"\u003eNote:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":49590606889239,"sku":"PRU-SPR-XL-021","price":138.88,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/XLTexturedPowder-coatedSteelSheet.jpg?v=1751583613"},{"product_id":"prusa-xl-satin-powder-coated-steel-sheet","title":"Prusa - XL Satin Powder-coated Steel Print Sheet","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSatin Powder-coated Steel Sheet for Original Prusa XL.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 tLDuP\" style=\"text-align: center;\" mb=\"3\" mt=\"3\" position=\"center\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eATTRIBUTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for both PLA and PETG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLightly textured surface finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNo need \u003c\/span\u003e\u003cspan\u003efor glue stick\u003c\/span\u003e\u003cspan\u003e for PETG\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWide range of supported filaments, including advanced materials.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"sc-a598ee94-0 tLDuP\" style=\"text-align: center;\" mb=\"3\" mt=\"3\" position=\"center\"\u003eNote:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":49590640017687,"sku":"PRU-SPR-XL-022","price":154.33,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/XLSatinSheet_e493c537-7adc-4bf9-8533-5e649d9d24ff.jpg?v=1751583608"},{"product_id":"prusa-xl-pa-nylon-powder-coated-print-sheet","title":"Prusa - XL PA Nylon Powder-coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003eDouble-sided Powder-coated PA Nylon Spring Steel Sheet for Original Prusa XL\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 tLDuP\" style=\"text-align: center;\" mb=\"3\" mt=\"3\" position=\"center\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eespecially the\u003cspan\u003e \u003c\/span\u003ePrusament PA11 Carbon Fiber Black.\u003cspan\u003e \u003c\/span\u003eThe PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in Prusa's knowledgebase.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eATTRIBUTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGreat for polyamide-based materials\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo need for a glue stick\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be cleaned just with water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be damaged with IPA and acetone\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":49937551393047,"sku":"PRU-SPR-XL-024","price":199.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/XLPANylonPowder-coatedPrintSheet.jpg?v=1751583605"},{"product_id":"prusa-pp-powder-coated-print-sheet","title":"Prusa - CORE One PP powder-coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003ePP powder-coated Print Sheet for Original Prusa \u003c\/strong\u003e\u003cstrong\u003eCORE one\/+, MK4\/S, MK3\/S\/+ and MK2.5\/S heatbeds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polypropylene-based filaments, especially the\u003cspan\u003e \u003c\/span\u003ePrusament PP Carbon Fiber Black.\u003cspan\u003e \u003c\/span\u003eThe PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.\u003c\/p\u003e\n\u003cp\u003eThe PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eNever clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan. Learn more about printing on the PP sheet in Prusas\u003c\/span\u003e online help articles.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePerfect for most PP materials\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo need for any separation layer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be cleaned with IPA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports printing large PP parts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable only for PP-based materials, PLA, PETG, and TPU. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be damaged with acetone\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":50204725444887,"sku":"PRU-ACC-MK3-0038","price":98.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/PPpowder-coatedPrintSheet.jpg?v=1751583539"},{"product_id":"prusa-ht90-pp-powder-coated-print-sheet","title":"Prusa - HT90 PP Powder-coated Print Sheet","description":"\u003cdiv class=\"sc-97e18afe-3 jbYLUh\"\u003e\n\u003cdiv class=\"sc-17c059f-0 gZqCYE\" id=\"falsedescription\"\u003e\n\u003ch1 class=\"sc-b0e4a643-4 gMagrx\"\u003e\n\u003cspan\u003eDouble-sided PP Powder-coated Print Sheet for Prusa Pro HT90 heatbed.\u003c\/span\u003e \u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-640706ad-0 eZCeM\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type materials generally have a lower adhesion on textured sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PP sheet has a lightly textured surface finish similar to the Satin Powder-coated sheet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for most PP materials\u003c\/li\u003e\n\u003cli\u003eNo need for any separation layer\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be cleaned with IPA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports printing large PP parts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable only for PP-based materials, PLA, PETG, and TPU. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be damaged with acetone\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":50688209486103,"sku":"PRU-SPR-HT9-010","price":197.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/HT90PPPowder-coatedPrintSheet_761ac5a6-d08e-4de2-bbe8-b89fb73bd876.avif?v=1754526449"},{"product_id":"prusa-ht90-hightemp-powder-coated-print-sheet","title":"Prusa - HT90 HighTemp Powder-coated Print Sheet","description":"\u003cdiv class=\"sc-97e18afe-3 jbYLUh\"\u003e\n\u003cdiv id=\"falsedescription\" class=\"sc-17c059f-0 gZqCYE\"\u003e\n\u003ch1 class=\"sc-2ebcaf2d-0 jrIhHd\"\u003eHT90 HighTemp Powder-coated Print Sheet\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eList of supported materials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli\u003ePES\u003c\/li\u003e\n\u003cli\u003ePPSU\u003c\/li\u003e\n\u003cli\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":50688227279127,"sku":"PRU-SPR-HT9-011","price":234.25,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/HT90HighTempPowder-coatedPrintSheet.avif?v=1754526761"},{"product_id":"prusa-xl-pp-powder-coated-print-sheet","title":"Prusa - XL PP powder-coated Print Sheet","description":"\u003cp\u003eDouble-sided \u003cstrong\u003ePowder-coated PP Spring Steel Sheet for Original Prusa XL.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-a598ee94-0 tLDuP\" style=\"text-align: center;\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polypropylene-based filaments, especially the\u003cspan\u003e \u003c\/span\u003ePrusament PP Carbon Fiber Black.\u003cspan\u003e \u003c\/span\u003eThe PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.\u003c\/p\u003e\n\u003cp\u003eThe PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.\u003c\/p\u003e\n\u003cp\u003eYou can learn more about the PP sheet in Prusa's knowledge base.\u003c\/p\u003e\n\u003ch4 class=\"sc-2ebcaf2d-0 kgZXXq\" style=\"text-align: center;\"\u003eIMPORTANT!\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eNever clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eATTRIBUTES:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePerfect for most PP materials\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo need for any separation layer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be cleaned with IPA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupports printing large PP parts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be damaged with acetone\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":51362294595863,"sku":"PRU-SPR-XL-027","price":209.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/XLPPpowder-coatedPrintSheet.avif?v=1757976327"},{"product_id":"prusa-core-one-l-textured-powder-coated-print-sheet","title":"Prusa - CORE One L Textured Powder-Coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003eDouble-sided textured PEI powder-coated spring steel sheet for Prusa CORE One L.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used in Prusa's print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":51644912369943,"sku":"PRU-ACC-COL-002","price":92.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/Prusa-COREOneLTexturedPowder-CoatedPrintSheet.avif?v=1764198500"},{"product_id":"prusa-core-one-l-satin-powder-coated-print-sheet","title":"Prusa - CORE One L Satin Powder-coated Print Sheet","description":"\u003cp\u003e\u003cstrong\u003eDouble-sided satin powder-coated spring steel sheet for Prusa CORE One L\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning : \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":51645009199383,"sku":"PRU-ACC-COL-005","price":99.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/COREOneLSatinPowder-coatedPrintSheet.avif?v=1764200886"},{"product_id":"prusa-core-one-l-smooth-pei-print-sheet","title":"Prusa - CORE One L Smooth PEI Print Sheet","description":"\u003cp\u003e\u003cstrong\u003eDouble-sided Smooth PEI spring steel sheet for Prusa CORE One L\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":51667181535511,"sku":"PRU-ACC-COL-003","price":105.65,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/CoreONELSmoothPEIPrintSheet.avif?v=1764637862"},{"product_id":"prusa-core-one-l-pp-powder-coated-print-sheet","title":"Prusa - Core ONE L PP powder-coated Print Sheet","description":"\u003ch2 class=\"sc-2ebcaf2d-0 jRsLfr\"\u003eCore ONE L PP powder-coated Print Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polypropylene-based filaments, especially the\u003cspan\u003e \u003c\/span\u003ePrusament PP Carbon Fiber Black.\u003cspan\u003e \u003c\/span\u003eThe PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.\u003c\/p\u003e\n\u003cp\u003eThe PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning : \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":52008826372375,"sku":"PRU-ACC-COL-001","price":188.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/CoreONELPPpowder-coatedPrintSheet.avif?v=1770365287"},{"product_id":"prusa-core-one-l-pa-nylon-powder-coated-print-sheet","title":"Prusa - Core ONE L PA Nylon Powder-coated Print Sheet","description":"\u003ch2 class=\"sc-2ebcaf2d-0 jRsLfr\"\u003eCore ONE L PP powder-coated Print Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOverview :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eespecially the\u003cspan\u003e \u003c\/span\u003ePrusament PA11 Carbon Fiber Black.\u003cspan\u003e \u003c\/span\u003eThe PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in Prusa's knowledgebase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe surface of this sheet should be cleaned only with pure water. \u003c\/span\u003e\u003cstrong\u003eUsing common agents such as IPA or Acetone will lead to a quick deterioration of the surface.\u003c\/strong\u003e\u003cspan\u003e Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":52228594204951,"sku":"PRU-ACC-COL-004","price":188.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/CoreONELPANylonPowder-coatedPrintSheet.avif?v=1770779022"},{"product_id":"prusa-ht90-textured-powder-coated-print-sheet","title":"Prusa - HT90 Textured Powder-coated Print Sheet","description":"\u003cdiv class=\"sc-97e18afe-3 jbYLUh\"\u003e\n\u003cdiv class=\"sc-17c059f-0 gZqCYE\" id=\"falsedescription\"\u003e\n\u003ch1 class=\"sc-b0e4a643-4 gMagrx\"\u003e\u003cspan\u003eDouble-sided textured PEI powder-coated spring steel sheet for Prusa Pro HT90.\u003c\/span\u003e\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-640706ad-0 eZCeM\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on Prusa'a print farm, look at the printed parts you have on your printer for reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PP sheet has a lightly textured surface finish similar to the Satin Powder-coated sheet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScratchproof, hard to damage\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransfers texture to prints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMore forgiving Live Adjust Z setting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrints automatically detach after sheet cools down\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirst layer can be more squished compared to smooth sheets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePLA prints with a small contact area may need a brim\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePLA prints with a huge footprint may warp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNeed to change Live Adjust Z if you also own Smooth PEI sheet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNever clean with acetone\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":52458274652439,"sku":"PRU-SPR-HT9-016","price":174.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/HT90TexturedPowder-coatedPrintSheet.avif?v=1773634569"},{"product_id":"prusa-ht90-pa-nylon-powder-coated-print-sheet","title":"Prusa - HT90 PA Nylon Powder-coated Print Sheet","description":"\u003cdiv class=\"sc-97e18afe-3 jbYLUh\"\u003e\n\u003cdiv class=\"sc-17c059f-0 gZqCYE\" id=\"falsedescription\"\u003e\n\u003ch1 class=\"sc-b0e4a643-4 gMagrx\"\u003e\n\u003cspan\u003eDouble-sided PA Nylon Powder-coated Print Sheet for Prusa Pro HT90 heatbed.\u003c\/span\u003e \u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-640706ad-0 eZCeM\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e especially the \u003c\/span\u003ePrusament PA11 Carbon Fiber Black.\u003cspan\u003e The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"Heading-sc-bb4ac814-0 cupPQE\"\u003eIMPORTANT!\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe surface of this sheet should be cleaned only with pure water. \u003c\/span\u003e\u003cstrong\u003eUsing common agents such as IPA or Acetone will lead to a quick deterioration of the surface.\u003c\/strong\u003e\u003cspan\u003e Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":53654243115287,"sku":"PRU-SPR-HT9-017","price":209.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/Prusa-HT90PANylonPowder-coatedPrintSheet.avif?v=1783658538"},{"product_id":"prusa-ht90-satin-powder-coated-print-sheet","title":"Prusa - HT90 Satin Powder-coated Print Sheet","description":"\u003cdiv class=\"sc-97e18afe-3 jbYLUh\"\u003e\n\u003cdiv class=\"sc-17c059f-0 gZqCYE\" id=\"falsedescription\"\u003e\n\u003ch1 class=\"Heading-sc-bb4ac814-0 ckKMBt\"\u003eHT90 Satin Powder-coated Print Sheet. \u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-640706ad-0 eZCeM\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003eIn terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with a lightly textured matte finish offers an optimal level of adhesion and makes it the most universal print sheet. Unlike the smooth or textured sheet, both PLA and PETG materials can be printed with the right amount of surface adhesion. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate, and more. A vast majority of materials can be printed without a separation layer (e.g., glue)\u003c\/span\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for both PLA and PETG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLightly textured surface finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAcetone causes the surface to quickly deteriorate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":54724147020055,"sku":"PRU-SPR-HT9-018","price":207.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0769\/8553\/2695\/files\/HT90SatinPowder-coatedPrintSheet.avif?v=1787023248"}],"url":"https:\/\/www.proforged3d.com.au\/collections\/prusa-sheets-copy.oembed","provider":"ProForged3D.","version":"1.0","type":"link"}